dmesg - GhostBSD 20.04 KPTI Clang 10.0.1
------
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE GENERIC amd64
FreeBSD clang version 10.0.0 (git@github.com:llvm/llvm-project.git llvmorg-10.0.0-0-gd32170dbd5b)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (1995.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6
Features=0xbfebfbff
Features2=0x8e39d
AMD Features=0x20100800
AMD Features2=0x1
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4084998144 (3895 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
arc4random: no preloaded entropy cache
ioapic0 irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1995037710 Hz quality 1000
random: entropy device external interface
000.000019 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81182b10, 0) error 19
[ath_dfs] loaded
[ath_rate] loaded
[ar9300] loaded
[ar5212] loaded
[ar5416] loaded
[ar5211] loaded
[ar5210] loaded
[ath] loaded
kbd1 at kbdmux0
nexus0
vtvga0: on motherboard
cryptosoft0: on motherboard
aesni0: No AES or SHA support.
acpi0: on motherboard
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [EC__] (0xfffff80004428380) [EmbeddedControl] (20200430/evregion-288)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200430/exfldio-428)
ACPI Error: Aborting method \134_SB.PCI0.SBRG.EC.BAT1._STA due to previous error (AE_NOT_EXIST) (20200430/psparse-689)
unknown: I/O range not supported
cpu0: on acpi0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: port 0x808-0x80b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: irq 16 at device 1.0 on pci0
pci1: on pcib1
vgapci0: port 0xec00-0xec7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
uhci0: port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: port 0xa480-0xa49f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: port 0xa400-0xa41f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: mem 0xf8efec00-0xf8efefff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: mem 0xf8ef8000-0xf8efbfff irq 22 at device 27.0 on pci0
pcib2: irq 16 at device 28.0 on pci0
pci2: on pcib2
pcib3: irq 17 at device 28.1 on pci0
pci3: on pcib3
re0: port 0xd800-0xd8ff mem 0xf9eff000-0xf9efffff,0xcfff0000-0xcfffffff irq 17 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: on re0
rgephy0: PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:21:85:49:c1:53
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: irq 18 at device 28.2 on pci0
pci4: on pcib4
ath0: mem 0xf9ff0000-0xf9ffffff irq 18 at device 0.0 on pci4
arc4random: no preloaded entropy cache
ath0: AR2425 mac 14.2 RF5424 phy 7.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
pcib5: irq 19 at device 28.3 on pci0
pci5: on pcib5
uhci3: port 0xb000-0xb01f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: port 0xac00-0xac1f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: port 0xa880-0xa89f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: mem 0xf8eff000-0xf8eff3ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib6: at device 30.0 on pci0
pci6: on pcib6
pci6: at device 4.0 (no driver attached)
sdhci_pci0: mem 0xf8ffe400-0xf8ffe4ff irq 16 at device 4.2 on pci6
sdhci_pci0: 1 slot(s) allocated
pci6: at device 4.3 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
ahci0: port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb41f mem 0xf8eff800-0xf8efffff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
ahciem0: on ahci0
acpi_button0: on acpi0
acpi_tz0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 3
acpi_acad0: on acpi0
battery0: on acpi0
acpi_lid0: on acpi0
orm0: at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0
est0: on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: at cad 0 on hdac0
hdaa0: at nid 1 on hdacc0
pcm0: at nid 20 and 24,25,26 on hdaa0
pcm1: at nid 22 on hdaa0
pcm2: at nid 27 on hdaa0
pcm3: at nid 30 on hdaa0
pcm4: at nid 23 on hdaa0
hdacc1: at cad 1 on hdac0
unknown: at nid 1 on hdacc1 (no driver attached)
hdacc2: at cad 2 on hdac0
hdaa1: at nid 1 on hdacc2
pcm5: at nid 5 on hdaa1
ugen6.1: at usbus6
ugen7.1: at usbus7
uhub0: on usbus6
uhub1: on usbus7
ugen5.1: at usbus5
ugen4.1: at usbus4
uhub2: on usbus5
uhub3: on usbus4
ugen3.1: at usbus3
ugen2.1: at usbus2
uhub4: on usbus3
uhub5: on usbus2
ugen0.1: at usbus0
uhub6: on usbus0
ugen1.1: at usbus1
Trying to mount root from zfs:tank/ROOT/initial []...
Root mount waiting for: CAM
uhub7: on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ACS-4 ATA SATA 3.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 04', SATA Slot: scbus2 target 0
cd0 at ahcich4 bus 0 scbus2 target 0 lun 0
cd0: Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
nvidia0: on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
random: unblocking device.
wlan0: Ethernet address: 00:15:af:cf:a5:98
lo0: link state changed to UP
re0: link state changed to DOWN
uhub1: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen7.2: at usbus7
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
wlan0: link state changed to UP
pid 9593 (hackbench_bin), jid 0, uid 1002: exited on signal 11 (core dumped)
pid 9830 (hackbench_bin), jid 0, uid 1002: exited on signal 11 (core dumped)
pid 10030 (hackbench_bin), jid 0, uid 1002: exited on signal 11 (core dumped)